How far are you from Borehamwood?

Our yard is in High Wycombe — about 20.5 miles, roughly 49 minutes off-peak via M25 Junction 23. That keeps travel charges down and return visits painless.

Do you cover Borehamwood?

Yes — Borehamwood is one of our regular areas. We work across WD6 weekly from our High Wycombe base (20.5 miles via M25 Junction 23). Building control notifications go through Hertsmere Borough Council where required.

Any payment options on bigger Borehamwood jobs?

Staged payments on jobs over £8k — typically 30% on scaffold, 40% on weatherproof, 30% on completion. No deposit before scaffold.

Why might a Borehamwood quote come in higher than a national average?

Access, scaffold days and tile matching for the WD6 housing stock all push the number around. That's the kind of local factor a national price calculator misses, which is why we quote on site.

Who's the local authority for Borehamwood roofing work?

Hertsmere Borough Council. We handle notifications and conservation submissions on your behalf — particularly relevant for properties near Aberford Park.

Service

Lead Flashing Cost (2026)

Lead flashing prices in 2026 — around £55/m for straight apron flashings, £75/m for stepped flashings up a gable, £95/m for lead-lined valleys. Minimum call-out £220. All Code 4 or 5, chased and pointed.

Straight apron: £45–£65 per metre
Step flashing: £65–£85 per metre
Lead valley (per m run): £85–£120
Cover flashing to felt roof: £45–£60/m
Chased 25mm, wedged, pointed in 3:1
60-year expected life on Code 4 lead

Where lead flashing actually goes

Anywhere a roof meets a wall, chimney, or another roof. Front and back aprons on chimneys, step flashings up gables, cover flashings where a lean-to roof meets the main house wall, saddle flashings over abutments, and valley linings where two pitches meet.

Code 4 vs Code 5 — the real difference

Code 4 is 1.80mm thick, weighs 20.4 kg/m² — standard for domestic. Code 5 is 2.24mm, 25.4 kg/m² — used where lead spans further or takes more thermal movement. On a typical semi, Code 4 is right for chimneys and aprons; Code 5 for valleys longer than 1.5m.

▸Chimney flashings — Code 4
▸Bay window roofs — Code 5
▸Valleys under 1.5m — Code 4
▸Valleys 1.5–2.5m — Code 5
▸Anything longer — split into bays with welted seams

Why we never use lead substitute

'Ubiflex' and similar synthetic lead alternatives cost the same, look OK for a year, then fade to grey and split at the folds. Real lead patinas silver, welds properly, and is fully recyclable. On any period property lead substitute will fail a building survey.

FAQs

Can you patch old lead or does it all need replacing?+

Bonded patches work well on Code 4/5 lead if the base sheet is fundamentally sound. A patch is £180–£280. If more than 30% of the sheet is affected we replace.

How do I know if my flashing's failed?+

Look for staining on the ceiling below the chimney/abutment, or visible lift/curl at the edges of the lead in wind.

Is lead theft still an issue?+

Rarely on domestic — pitched-roof lead is riskier to steal than value's worth. Commercial and church roofs still get targeted; we fit SmartWater on those.

Need Roofing Work You Can Rely On?

Speak with Butler Bespoke Roofing for honest advice, a free site visit and a clear, written quote anywhere across Buckinghamshire.

Request a Quote Book Free Roof Inspection